I have an NVidia GTX 1080 and I’m currently trying out mining eth and getting about 20MH/s. Is there any coin that would make it worth it to mine? Now miner supports HTTP for remote monitoring, you can check miner state remotely via browser, check “-mport” option how to mine lbry nvidia for details. Today I tried increasing the intensity for the secondary coin on my EVGA GTX CLASSIFIED 980ti card. I was able to more than double the hashrate for SiaCoin from 210MH/s to 540MH/s by increasing the “-dcri” intensity value from default to “-dcri 75”.

Supports GPU selection, built-in GPU overclocking features and temperature management. Added ability to use environment variables in “epools.txt”, “dpools.txt” and “config.txt” files. For example, define “WORKER” environment variable and use it as “%WORKER%” in config.txt.

Also “-ethi” now can set intensity for every card individually, for example “-ethi 1,8,6”. Specify “-asm 0” to disable this option. You can also specify values for every card, for example “-asm 0,1,0”.

Whereas a single GTX 1080 TI is only capable of producing 500+ Mh/s so there is no point in mining lbry using CPU or GPU. Anyways if you’d like to support the network then you can use the following miners. The miner will start, run the setx commands to set those environment https://cryptolisting.org/ variables, initialize each of your GPU’s, build the DAG file on each of your GPU’s and start hashing away. Let it run for about 20 seconds and then click “s” to display your Hashing speed. If you’ve followed the steps above you should see this screen.

Subscribe to our weekly mailing list and get latest crypto news, resources and guides to your email!

Other pools may not require you to do this. In this guide, we’re going to cover GPU mining on a Windows computer, as CPU mining has become rather unprofitable. We are using an AMD GPU for this guide and we also assume you already have a LBC wallet and address. I see only one card instead of two in temperature management info. Yes, see “-tt”, “-dcri”, “-ttdcr”, “-li” options.

• LBC PoW is not very good for dual mining, it causes a bit less Ethereum mining speed.
• For the best hashrate you must also set high memory clock, so “-strap 1” is a good start point for tests.
• This feature is disabled by default (“-tstop 0”).
• LBRY mining is dominated by the ASIC/FPGA market.
• A bit reduced required GPU memory so you can mine ETH a bit longer on cards that don’t have enough memory.

You can also specify values for every card, for example “-lidag 1,0,3”. To cancel/reduce developer fee, saying that 1% developer fee is too much for this miner and so on. Miner has to use two DAGs in this mode – one for Ethereum and one for Ethereum fork, it can cause crashes because DAGs have different sizes. This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.e. how many epochs will be processed without buffer reallocation.

Setting up your FPGA

Check “FINE-TUNING” section below for additional notes. There are builds for Windows x64 and for Linux x64 (tested on Ubuntu 14.04). Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.

Those of you discussing the 1x – 3x splitters they dont work. I couldnt get any card to post in them. Even my 7 slot msi will only do 6 gpu for some reason. When i put it in the 2nd pcie 1x next to the middle 16x slot it wont post. 24paybank.com This service helps to buy or sell bitcoin with a guarantee of receipt of funds. I noticed that I was running a 29 mhs low power mod and after 1 hour GPU 1 dropped to 25.

How do I mine LBC?

You can use your own straps or use “-strap” option, you will get boost anyway. Most Proof of Work algorithms including SHA-256 that is used by Bitcoin was only CPU mineable during its early days. Then GPU miners came and made CPU mining less viable. Later GPUs was completely replaced by specialized ASIC mining machines. Now only users who own such specialized miners can make profit from mining Bitcoin and other top most Altcoins.

Then increase “-sintensity” value to find best stable hashrate. This option works only if miner manages cooling, i.e. when “-tt” option is used to specify target temperature. You can also specify values for every card, for example “-tstart 50,55,50”. Note that “-tstart” option value must be less than “-tstop” option value. For example, “-r 60” – restart miner every hour or when some GPU failed. Use this option in ETH-only ASM mode for fine tuning, read “FINE-TUNING” section below.

This miner does not use HTTP protocol, it uses Stratum directly. So you should connect it directly to the pool at Stratum port and it will work a bit faster than official miner via proxy because there is no proxy between miner and pool. Use “epools.txt” and “dpools.txt” files to specify additional pools. These files have text format, one pool per line. Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares. If the first character of a line is “;” or “#”, this line will be ignored.

Restarted the miner and both GPUs are hashing at 29 MHs with no issues for 4 hours. To see the current block reward, visit the LBRY Blockchain Explorer and explore the latest block details. The first stage went from block 1 to block 5100 and took roughly 9 days. Every block in this stage had a reward of 1 credit.

X11GOST Algorithm – SIBCoin ASIC miner & list of coins based on X11-Gost

If you want to skip a step on the way to recover your Nicehash investment, we recommend checking out this feature. In order to buy hashing power you will need some funds. You can deposit any of the below coins in. In order to submit an order, you will need to exchange your deposited altcoins to BTC.

Place one option per line, if first character of a line is “;” or “#”, this line will be ignored. If you don’t agree with the dev fee – don’t use this miner. Added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at “-dcri 1” (i.e. you cannot find speed peak), use “-asm 2” option to enable this mode. Added “-allcoins etc” option for ETC pools that require Username.Worker, in this mode devfee will be mined on some default ETC pools and DAG will not be recreated. There is Baikal miner BK-D which produces 70 GH/s @ 1100 Watts and it is also capable of dual mining.

This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer. LBRY mining is dominated by the ASIC/FPGA market. GPU & CPU mining is not viable at this point given the network difficulty. Where we list or describe different products and services, we try to give you the information you need to help you compare them and choose the right product or service for you.

Official Ethereum miner does not support Stratum protocol, it supports HTTP protocol only. It causes less profit because of delays. A proxy was created to fix it, so official Ethereum miner is locally connected to the proxy by HTTP protocol, for local network delays due to HTTP protocol are small. Proxy is connected to the pool via Stratum protocol so it has small delays too. Currently most pools support Stratum and you have to use HTTP-to-Stratum proxy to make official miner work with pools properly. Of course you can try to connect official miner to a pool directly via HTTP but you will lose 10-20% shares because of a short block time in Ethereum.

We are crypto enthusiasts and our main intention with Coin Guides is to educate people about Cryptocurrency and Blockchain technology. We regularly publish content about Bitcoin, Ethereum, Altcoins, wallet guides, mining tutorials and trading tips. Also please don’t try to hire me to help with some mining farm, to create some miner for some coin, etc – I just don’t have time for it. Could you please release a miner that will only mine solo with the eth proxy for a reasonable upfront cost. The LBRY blockchain has a targeted block time of 2.5 minutes.

To finish the configuration, you will need to choose a mining pool. Today, we’re going to teach you how to mine LBRY with your GPU on a mining pool. This method does not require you to store the blockchain. You will, however, need to choose a pool and pay the corresponding fee (usually 1%). LBC PoW is not very good for dual mining, it causes a bit less Ethereum mining speed. Miner supports remote monitoring/management via JSON protocol over TCP/IP sockets.

At some point if ASICs become available then the mining pool will delist that particular coin to avoid GPU miners from wasting power. On the other hand there are some GPU mining pools that continues to provide support for such coins. All these mining pools provide instructions on how to join and start mining.

Ethereum is not supported for this pool for now because it does not accept Ethereum wallet addresses, read OP for details. Also all command line options must be in same line in .bat file, don’t split them to several lines, it won’t work. Use “epools.txt” and “dpools.txt” files to specify additional pools (you can use “-epoolsfile” and “-dpoolsfile” options to use different filenames). Currently Polaris, Vega and Nvidia 10xx cards are supported, support for other cards will be added later. Specify negative value to enable monitoring but disable management , for example, “-mport -3333” enables port 3333 for remote monitoring, but remote management will be blocked. This feature is disabled by default (“-tstart 0”).